Live IoT demo · Water & utilities
RO Water Plant Monitoring
TDS, pH, turbidity and membrane pressure of your packaged-water plant, live - the plant runs itself when the tank is low.
Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.
Output TDS
225 ppm
Normal 50-400 ppm
Output pH
7.40 pH
Normal 6.8-8 pH
Water turbidity
2.3 NTU
Normal 0.5-4 NTU
Product tank level
63 %
Normal 30-95 %
Membrane pressure
3.50 bar
Normal 2-5 bar
Switches
- High-pressure pump
- Membrane flush valve
Rules
- If Product tank level below 30 % → turn on High-pressure pump + alert
- If Output TDS above 500 ppm → turn on Membrane flush valve + alert
- If Output pH below 6.5 pH + alert
- If Water turbidity above 5 NTU + alert
- If Membrane pressure above 7 bar + alert
Alerts
No alerts yet - the demo acts out each rule in turn every half minute or so.
All readings are simulated in your browser. Nothing is sent anywhere.
What it does
- Live TDS, pH and turbidity of product water
- Plant starts and stops by product tank level
- Auto membrane flush on high TDS
- Filter change alert from membrane pressure
- Quality log for BIS / FSSAI records
- Daily litres produced
Connectivity: Wi-Fi
Problems it solves
Problem
Water quality is checked with a hand meter once a day.
Training Trains solution
TDS, pH and turbidity are read every few seconds and logged.
Problem
The plant runs dry or overflows the tank when the operator is away.
Training Trains solution
Tank level starts and stops the pump by itself.
Problem
Membranes are replaced early or too late.
Training Trains solution
Pressure trend shows when filters actually need changing.
Hardware kit
- ESP32 controller board
- Gravity TDS sensor
- Analog pH sensor kit (E-201-C probe)
- Analog turbidity sensor
- JSN-SR04T waterproof ultrasonic sensor
- 0-10 bar pressure transducer
- 1-channel 10A relay + contactor
- 12V solenoid valve + relay
- 12V/5V power supply, enclosure and wiring
The exact parts depend on your site. We confirm them after a site visit or a video call.
Used by
Customise it
Want other sensors or rules? Open the easy IoT builder and see your own version working right away.
More IoT demos
Frequently asked questions
What hardware does the RO Water Plant Monitoring need?
An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.
Is the data shown here real?
No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.
Do I get a mobile app and a website?
Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.
Can it work without Wi-Fi?
Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.
Want the RO Water Plant Monitoring for your site?
We supply the device, install it and set up your web dashboard and mobile app.
Discuss This On WhatsAppOr send us the details directly: