Live IoT demo · Manufacturing
Factory Machine Monitoring
Know which machine runs, idles or is about to fail - without walking the floor.
Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.
Motor current
7.0 A
Normal 2-12 A
Spindle vibration
2.5 mm/s
Normal 0.5-4.5 mm/s
Bearing temperature
27.0 °C
Normal 22-32 °C
Parts produced
43
Normal 5-80
Switches
- Machine
- Andon light
Rules
- If Spindle vibration above 7 mm/s → turn on Andon light + alert
- If Bearing temperature above 45 °C + alert
- If Motor current below 1 A + alert
Alerts
No alerts yet - the demo acts out each rule in turn every half minute or so.
All readings are simulated in your browser. Nothing is sent anywhere.
What it does
- Run / idle / off status of every machine
- Production count per shift
- OEE and downtime reasons
- Vibration and temperature trend for predictive maintenance
- Power used per part
- Shift report on WhatsApp
Connectivity: Wi-Fi / Ethernet; Modbus for PLCs
Problems it solves
Problem
Downtime is noticed late and never measured.
Training Trains solution
Every stop is logged with its time; the reason is picked on the app.
Problem
Breakdowns come without warning.
Training Trains solution
Vibration and heat trends flag a failing bearing early.
Hardware kit
- ESP32 controller board
- SCT-013 clamp current sensor
- MPU6050 accelerometer
- DHT22 temperature & humidity sensor
- IR beam break counter pair
- Contactor + relay
- 12V siren + relay
- 12V/5V power supply, enclosure and wiring
The exact parts depend on your site. We confirm them after a site visit or a video call.
Used by
Customise it
Want other sensors or rules? Open the easy IoT builder and see your own version working right away.
More IoT demos
Frequently asked questions
What hardware does the Factory Machine Monitoring need?
An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.
Is the data shown here real?
No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.
Do I get a mobile app and a website?
Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.
Can it work without Wi-Fi?
Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.
Want the Factory Machine Monitoring for your site?
We supply the device, install it and set up your web dashboard and mobile app.
Discuss This On WhatsAppOr send us the details directly: