Live IoT demo · Agriculture

Smart Farm Irrigation

Soil moisture decides when the motor runs - from your phone, even when you are not at the farm.

Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.

Smart Farm IrrigationAll normal● Device online

Soil moisture - field 1

53 %

Normal 35-70 %

Air temperature

27.0 °C

Normal 22-32 °C

Humidity

55 %

Normal 40-70 %

Well / sump level

63 %

Normal 30-95 %

Rain

Dry

Rain drop sensor

Switches

  • Borewell motor
  • Drip line valve

Rules

  • If Soil moisture - field 1 below 35 % → turn on Borewell motor + alert
  • If Well / sump level below 30 % + alert
  • If Air temperature above 38 °C + alert

Alerts

No alerts yet - the demo acts out each rule in turn every half minute or so.

All readings are simulated in your browser. Nothing is sent anywhere.

What it does

  • Auto motor on/off by soil moisture
  • Remote motor switch from the app
  • Dry-run protection with sump level
  • Daily water used and motor hours
  • Rain skip: no watering when it rains
  • Alerts on WhatsApp / app notification

Connectivity: Wi-Fi or 4G SIM router; LoRa for large fields

Problems it solves

Problem

A trip to the field just to switch the motor on or off, often at night when power comes.

Training Trains solution

The app shows power and soil status and switches the motor from anywhere; auto mode does it by itself.

Problem

Over-watering wastes power and water and harms the roots.

Training Trains solution

The motor runs only until the soil reaches the set moisture.

Problem

The motor burns when the well runs dry.

Training Trains solution

Sump level is checked before and during every run.

Hardware kit

  • ESP32 controller board (with 4G module where Wi-Fi is not available)
  • Capacitive soil moisture sensor v1.2
  • DHT22 temperature & humidity sensor
  • JSN-SR04T waterproof ultrasonic sensor
  • Rain drop sensor
  • 1-channel 10A relay + contactor
  • 12V solenoid valve + relay
  • 12V/5V power supply, enclosure and wiring

The exact parts depend on your site. We confirm them after a site visit or a video call.

Used by

Customise it

Want other sensors or rules? Open the easy IoT builder and see your own version working right away.

More IoT demos

Frequently asked questions

What hardware does the Smart Farm Irrigation need?

An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.

Is the data shown here real?

No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.

Do I get a mobile app and a website?

Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.

Can it work without Wi-Fi?

Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.

Want the Smart Farm Irrigation for your site?

We supply the device, install it and set up your web dashboard and mobile app.

Discuss This On WhatsApp

Or send us the details directly: