Live IoT demo · Manufacturing

Packing Line Output Counter

Products per minute on every line, live - with an alarm the moment a line slows or a motor overloads.

Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.

Packing Line Output CounterAll normal● Device online

Packs per minute

60 /min

Normal 40-80 /min

Conveyor motor current

7.0 A

Normal 2-12 A

Switches

  • Conveyor
  • Line alarm

Rules

  • If Packs per minute below 20 /min → turn on Line alarm + alert
  • If Conveyor motor current above 15 A + alert

Alerts

No alerts yet - the demo acts out each rule in turn every half minute or so.

All readings are simulated in your browser. Nothing is sent anywhere.

What it does

  • Live count per line and per shift
  • Slow-line alarm and stoppage minutes
  • Conveyor start/stop from the supervisor phone
  • Motor overload warning
  • Shift and daily output report
  • Target vs actual on one screen

Connectivity: Wi-Fi

Problems it solves

Problem

Output is counted by hand at shift end, so a slow hour is never seen.

Training Trains solution

A sensor counts every pack and the screen shows the rate minute by minute.

Problem

Stoppages are reported late or not at all.

Training Trains solution

The line alarm goes off as soon as the rate drops.

Problem

Motors burn when the conveyor jams.

Training Trains solution

Motor current is watched and overloads raise an alert.

Hardware kit

  • ESP32 controller board
  • IR proximity sensor over the conveyor
  • SCT-013 clamp current sensor
  • Contactor + relay
  • 12V siren + relay
  • 12V/5V power supply, enclosure and wiring

The exact parts depend on your site. We confirm them after a site visit or a video call.

Used by

Customise it

Want other sensors or rules? Open the easy IoT builder and see your own version working right away.

More IoT demos

Frequently asked questions

What hardware does the Packing Line Output Counter need?

An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.

Is the data shown here real?

No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.

Do I get a mobile app and a website?

Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.

Can it work without Wi-Fi?

Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.

Want the Packing Line Output Counter for your site?

We supply the device, install it and set up your web dashboard and mobile app.

Discuss This On WhatsApp

Or send us the details directly: