Live IoT demo · Retail & finance

Jewellery & Shop Security Alarm

Flame, smoke, locker tampering and night intrusion - siren on site and an alert on your phone at once.

Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.

Jewellery & Shop Security AlarmAll normal● Device online

Flame

Clear

IR flame sensor module

Smoke

165 ppm

Normal 80-250 ppm

Locker / safe vibration

2.5 mm/s

Normal 0.5-4.5 mm/s

Shop floor motion

Clear

HC-SR501 PIR motion sensor

Shutter

Closed

MC-38 magnetic door switch

Switches

  • Siren
  • Flood light

Rules

  • If Flame above 0.5 → turn on Siren + alert
  • If Smoke above 400 ppm → turn on Siren + alert
  • If Locker / safe vibration above 8 mm/s → turn on Siren + alert
  • If Shop floor motion above 0.5 → turn on Flood light + alert
  • If Shutter above 0.5 + alert

Alerts

No alerts yet - the demo acts out each rule in turn every half minute or so.

All readings are simulated in your browser. Nothing is sent anywhere.

What it does

  • Arm at closing, disarm at opening - from the app
  • Fire, smoke and locker-tamper alarm
  • Siren and flood light switch on by themselves
  • Shutter open/close times for every day
  • Alert to every partner on the team
  • Keeps working on 4G when the shop Wi-Fi is cut

Connectivity: Wi-Fi with 4G SIM backup

Problems it solves

Problem

A break-in or short-circuit at night is found only when the shop opens.

Training Trains solution

Sensors raise the siren and alert the owner within seconds.

Problem

Thieves cut the phone or Wi-Fi line first.

Training Trains solution

A 4G SIM router keeps the alarm online, and the siren works on the board even with no internet.

Problem

Nobody knows who opened the shutter and when.

Training Trains solution

Every shutter opening is logged with the time.

Hardware kit

  • ESP32 controller board (with 4G module where Wi-Fi is not available)
  • IR flame sensor module
  • MQ-2 gas & smoke sensor
  • MPU6050 accelerometer
  • HC-SR501 PIR motion sensor
  • MC-38 magnetic door switch
  • 12V siren + relay
  • Relay module
  • 12V/5V power supply, enclosure and wiring

The exact parts depend on your site. We confirm them after a site visit or a video call.

Used by

Customise it

Want other sensors or rules? Open the easy IoT builder and see your own version working right away.

More IoT demos

Frequently asked questions

What hardware does the Jewellery & Shop Security Alarm need?

An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.

Is the data shown here real?

No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.

Do I get a mobile app and a website?

Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.

Can it work without Wi-Fi?

Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.

Want the Jewellery & Shop Security Alarm for your site?

We supply the device, install it and set up your web dashboard and mobile app.

Discuss This On WhatsApp

Or send us the details directly: