Live IoT demo · Facilities
Generator (DG Set) Monitoring
Generator starts when mains fail, and you see fuel, load and room heat from anywhere.
Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.
Mains voltage
230 V
Normal 215-245 V
Diesel level
60 %
Normal 20-100 %
Generator load current
7.0 A
Normal 2-12 A
Generator room temperature
27.0 °C
Normal 22-32 °C
Switches
- Generator start
Rules
- If Mains voltage below 180 V → turn on Generator start + alert
- If Diesel level below 20 % + alert
- If Generator load current above 25 A + alert
- If Generator room temperature above 45 °C + alert
Alerts
No alerts yet - the demo acts out each rule in turn every half minute or so.
All readings are simulated in your browser. Nothing is sent anywhere.
What it does
- Auto start on mains failure
- Diesel level and refill alerts
- Run hours and diesel used per day
- Overload and room-heat alerts
- Start/stop test run from the app
- Power cut history for the month
Connectivity: Wi-Fi with 4G backup
Problems it solves
Problem
Someone has to run to start the generator at every power cut.
Training Trains solution
The generator starts by itself when mains voltage drops.
Problem
Diesel runs out in the middle of a long cut.
Training Trains solution
Diesel level is live and a refill alert comes at 20%.
Problem
Diesel use and run hours are not tracked.
Training Trains solution
Every run is logged with hours and fuel used.
Hardware kit
- ESP32 controller board (with 4G module where Wi-Fi is not available)
- PZEM-004T energy meter module
- Capacitive fuel level sensor
- SCT-013 clamp current sensor
- DHT22 temperature & humidity sensor
- Auto-start relay to the DG controller
- 12V/5V power supply, enclosure and wiring
The exact parts depend on your site. We confirm them after a site visit or a video call.
Used by
Customise it
Want other sensors or rules? Open the easy IoT builder and see your own version working right away.
More IoT demos
Frequently asked questions
What hardware does the Generator (DG Set) Monitoring need?
An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.
Is the data shown here real?
No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.
Do I get a mobile app and a website?
Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.
Can it work without Wi-Fi?
Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.
Want the Generator (DG Set) Monitoring for your site?
We supply the device, install it and set up your web dashboard and mobile app.
Discuss This On WhatsAppOr send us the details directly: