Live IoT demo · Schools, colleges & offices
Classroom & Office Energy Saver
Lights and fans run only while a room is in use - and fresh-air alerts when the room gets stuffy.
Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.
Room in use
Clear
HC-SR501 PIR motion sensor
Room temperature
27.0 °C
Normal 22-32 °C
CO₂ (stuffiness)
700 ppm
Normal 400-1000 ppm
Daylight
550 lux
Normal 200-900 lux
Switches
- Lights
- Fans
- AC
Rules
- If Room in use above 0.5 → turn on Lights + alert
- If Room temperature above 33 °C → turn on Fans + alert
- If CO₂ (stuffiness) above 1200 ppm → turn on Fans + alert
Alerts
No alerts yet - the demo acts out each rule in turn every half minute or so.
All readings are simulated in your browser. Nothing is sent anywhere.
What it does
- Lights follow room use
- Fans by temperature and air quality
- All rooms off at closing time from one screen
- Hours each room was in use
- CO₂ alerts for healthier classrooms
- Power saved per month
Connectivity: Wi-Fi
Problems it solves
Problem
Lights and fans run in empty classrooms and cabins all day.
Training Trains solution
Motion and daylight sensors switch them only while the room is used.
Problem
Closed rooms get stuffy and students lose focus.
Training Trains solution
CO₂ is measured and fans or windows are prompted in time.
Problem
A watchman walks every floor to switch things off.
Training Trains solution
Every room is switched off from the phone in one tap.
Hardware kit
- ESP32 controller board
- HC-SR501 PIR motion sensor
- DHT22 temperature & humidity sensor
- MH-Z19B CO₂ sensor
- BH1750 light sensor
- Relay module
- IR blaster or relay
- 12V/5V power supply, enclosure and wiring
The exact parts depend on your site. We confirm them after a site visit or a video call.
Used by
Customise it
Want other sensors or rules? Open the easy IoT builder and see your own version working right away.
More IoT demos
Frequently asked questions
What hardware does the Classroom & Office Energy Saver need?
An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.
Is the data shown here real?
No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.
Do I get a mobile app and a website?
Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.
Can it work without Wi-Fi?
Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.
Want the Classroom & Office Energy Saver for your site?
We supply the device, install it and set up your web dashboard and mobile app.
Discuss This On WhatsAppOr send us the details directly: