Live IoT demo · Aquaculture

Fish & Shrimp Pond Monitoring

Oxygen, pH and temperature of every pond, with aerators that start themselves.

Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.

Fish & Shrimp Pond MonitoringAll normal● Device online

Dissolved oxygen

7.0 mg/L

Normal 5-9 mg/L

pH

7.40 pH

Normal 6.8-8 pH

Water temperature

27.0 °C

Normal 22-32 °C

Salinity / TDS

225 ppm

Normal 50-400 ppm

Switches

  • Aerators

Rules

  • If Dissolved oxygen below 4 mg/L → turn on Aerators + alert
  • If pH above 8.5 pH + alert
  • If pH below 6.5 pH + alert

Alerts

No alerts yet - the demo acts out each rule in turn every half minute or so.

All readings are simulated in your browser. Nothing is sent anywhere.

What it does

  • Live DO, pH and temperature per pond
  • Auto aerator by oxygen
  • Night oxygen-crash alarm
  • Feeding log
  • Pond history for each crop
  • Multi-pond map view

Connectivity: 4G or LoRa (ponds are far apart)

Problems it solves

Problem

Oxygen crashes at night and the crop dies by morning.

Training Trains solution

Aerators start on low oxygen and the owner gets a call alert.

Problem

Water is tested by hand once a day.

Training Trains solution

Readings every few minutes, with a history.

Hardware kit

  • ESP32 controller board (with 4G module where Wi-Fi is not available)
  • Analog dissolved oxygen sensor
  • Analog pH sensor kit (E-201-C probe)
  • DHT22 temperature & humidity sensor
  • Gravity TDS sensor
  • Contactor + relay
  • 12V/5V power supply, enclosure and wiring

The exact parts depend on your site. We confirm them after a site visit or a video call.

Used by

Customise it

Want other sensors or rules? Open the easy IoT builder and see your own version working right away.

More IoT demos

Frequently asked questions

What hardware does the Fish & Shrimp Pond Monitoring need?

An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.

Is the data shown here real?

No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.

Do I get a mobile app and a website?

Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.

Can it work without Wi-Fi?

Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.

Want the Fish & Shrimp Pond Monitoring for your site?

We supply the device, install it and set up your web dashboard and mobile app.

Discuss This On WhatsApp

Or send us the details directly: