Live IoT demo · Campuses & communities

Smart Street & Campus Lighting

Lights switch on at dusk and off at dawn by themselves, with voltage watch for every line.

Open the live business demoFull screen: a real-looking business with several devices, 24 h history, alerts, reports and team.

Smart Street & Campus LightingAll normal● Device online

Daylight

550 lux

Normal 200-900 lux

Movement on the road

Clear

HC-SR501 PIR motion sensor

Line voltage

230 V

Normal 215-245 V

Switches

  • Street lights

Rules

  • If Daylight below 40 lux → turn on Street lights + alert
  • If Line voltage below 190 V + alert
  • If Line voltage above 260 V + alert

Alerts

No alerts yet - the demo acts out each rule in turn every half minute or so.

All readings are simulated in your browser. Nothing is sent anywhere.

What it does

  • Dusk-to-dawn switching by a light sensor, not a timer
  • Manual on/off for events from the app
  • Movement log for night patrol
  • Low / high voltage alerts per line
  • Lamp-hours for maintenance planning
  • One screen for every pole group

Connectivity: Wi-Fi mesh or LoRa across the campus

Problems it solves

Problem

Lights burn through the morning because someone forgot the switch.

Training Trains solution

A light sensor switches them off at sunrise every day.

Problem

Timers drift and need resetting as the seasons change.

Training Trains solution

Switching follows actual daylight, so there is nothing to reset.

Problem

Voltage swings burn lamps and drivers.

Training Trains solution

Voltage is watched and the team is alerted before lamps fail.

Hardware kit

  • ESP32 controller board
  • BH1750 light sensor
  • HC-SR501 PIR motion sensor
  • PZEM-004T energy meter module
  • Relay module
  • 12V/5V power supply, enclosure and wiring

The exact parts depend on your site. We confirm them after a site visit or a video call.

Used by

Customise it

Want other sensors or rules? Open the easy IoT builder and see your own version working right away.

More IoT demos

Frequently asked questions

What hardware does the Smart Street & Campus Lighting need?

An ESP32 board (Wi-Fi) or an ESP32 with a 4G/LoRa module, the sensors and relays listed on this page, a power supply and an enclosure. We supply and install the kit, or work with your electrician.

Is the data shown here real?

No. The readings on this page are simulated in your browser so you can see how the dashboard, mobile app and alerts behave. The real system shows your own devices.

Do I get a mobile app and a website?

Yes. Every IoT project includes a web dashboard for the office and an Android/iOS app for the owner and staff, with alerts on the phone and on WhatsApp.

Can it work without Wi-Fi?

Yes. Devices can use a 4G SIM or LoRa radio, and they keep running their automatic rules even when the internet is down.

Want the Smart Street & Campus Lighting for your site?

We supply the device, install it and set up your web dashboard and mobile app.

Discuss This On WhatsApp

Or send us the details directly: